Moving stills

I was stuck in Palo Alto waiting for an appointment at the Genius Bar. With a couple of hours to kill, I took out my new Sony a57 to see what would happen. I learned a few things along the way …

…the built in mic under most circumstances is useful only as a reference to sync audio recorded from another source

…lots of CMOS wobble in handheld shots

…history lesson – image capturing sensors are either CMOS or CCD. CMOS is regarded as cheaper and arguably superior in taking photographs so it’s found in most DSLRs. Because of the lens selection, which can give a shallow depth of field and natively blur the foreground or background, digital SLRs became a popular choice for restricted budgets as a means of producing high quality film-like movies. the trade off is CMOS sensors have a tendency to make images look warped or rubbery when fast pans are used.

…I didn’t expect this much wobble just walking with it though. It may have to do with Sony’s in body stabilization which suspends the sensor and moves it to counteract hand shakiness.

…hand straps are better than the neck straps that come with cameras

….whenever you think your done recording wait another 10-15 seconds and try and give that same time before hand if your going to do some panning. the extra footage comes in handy for editing especially if transitions are going to be used.

…Sony and Panasonic helped create the AVCHD codec in which their cameras record. It’s pretty advanced and from what I can tell is part of the reason the resulting 28 mpbs avchd .mts files are comparable to a canon that records in 50 mbps .mp4. The downside are the .mts files don’t play well with Final Cut. So don’t drag all the files off the SD card onto a drive. Instead use the import from camera option in Final Cut. Something about keeping them in the camera created folders makes it easier for Final Cut to use the clips otherwise it’ll be an extra unnecessary step converting all the mts files into prores.

… 1080p (progressive) = 1,080 horizontal lines of resolution displayed all together. 1080i (interlaced) = 1,080 horizontal lines of resolution displayed alternately, so in actuality at any given frame your only seeing 540 lines or half of the 1,080 lines that make up that frame.

…1080p at 60 frames per second is not going to happen right now in Final Cut. The clips I shot at that quality were not useable in FCPX and was changed to 24 frames. I haven’t found a work around yet. 1080i at 60 frames works well though. 60 frames a second is desirable if one wants to slow motion things in post. The effect looks smoother since there are frames of information to work with.

…if you want that cinematic film look these are the things i would do to my camera settings. 1) 24 frames per second 2) lower saturation and contrast all the way – it’s easier to color grade in post 3) use a lens with an aperture of 3.5 or below – for that shallow depth of field, blurry goodness effect.

…the huge Microsoft Store is just wrong next to the tiny Apple Store. The huge empty Microsoft store is just right next to the packed tiny Apple Store.

…all of the above only helps to enhance. if there isn’t any thought into the composition or emotions than the greatest camera and editing really only dresses up poop. It’s still going to stink. Because it’s poop.

…I guess dressed up poop can be entertaining sometimes. So here’s some high resolution doo doo.